An integral part of the drive assembly has been completed. Pictured here is the adapter plate that I had a local machine shop fabricate for me - along side the cardboard template that I made. The adapter was made from a 2 inch thick piece of aluminum plate. It connects the electric motor to the original bellhousing at the correct distance to allow for coupling the shafts together.
1 comment:
right on dude
hit all the nails right on
i would rather walk too.
Here in vancouver, bc area I have seen a Fiero and RX7 converted, sporty, but may lose handling with all lead acid batteries.
Your conversion is right on the money, just make sure you can still do a burnout. If you go automatic, you may need to keep the torque converter for this.
Qman
Post a Comment